I generally pack my cordage in little bundles like
Unfortunately for any significant length (100' for instance) it just turns into a wadded mess when I try and use it.
How can I pack this stuff without that happening?
I pack it like you do, and rarely ever have trouble. I think the important steps are what you do when you go to use it and what you use it for.
First when I go to use it I remove the cross wrap completely.
I hold it by the loop at the top or bottom. Once the cross wrap is undone I pull the mid section apart and lay it on the ground so it is in a complete circle.
I don't touch the other end as much as possible. This is pretty easy when climbing but much harder during other activities. If I know I need some of the other end but will not need to touch it after that (like tying to an anchor or plugging in an extension cord) then I pull the amount I need out that side of the rope and then lay the circle of rope on the ground that side down. I will try to find a video or pics of this.
Also, when coiling the rope up, if it's more than 100ft I use the "Backpackers" Coil (also know as a "butterfly" coil). I did a short Google search and this video came up that explained it exactly how I do it.
If you are coiling anything by hand, and not using the behind the neck method, twist the rope as you coil it, it will coil and un-coil much easier. A simple half twist is usually all it needs which once you get in the habit you will find yourself doing with out realizing it as you coil anything. This Video does a good job of showing what I am talking about from seconds 22 to 32. I do not have sound so I have no idea what he is saying but the action is perfect.
What I have found works best (especially with light rope/cord) is to spool the cord in "figure 8s" between two fingers, wrists or arms:
Hold one end in your hand in front of you then sweep under the running end with the other hand and lift up so the running end drapes over the top of your hand and away from center. Sweep under with the first hand and lift up so the running end again drapes over the top and away. The cord will make an X between your hands. Repeat. Use the remaining end to wrap tightly around the X and tuck the end in. This method keeps the coils separate, and does not introduce any twists in the rope.
This has virtually eliminated tangles from my life in everything from climbing rope to dental floss.
A diagram would help but I'm thumbing this out on a DumbPhone so that will have to wait.
In my experience nothing beats a "card winder" for ease of use and avoiding tangles in thin cord (such as kite lines). The card must be sized to the volume of cord stored on it.
The cord it wrapped over the horns in a figure-8 pattern that avoids twists. (High resolution image)
For cord too large to practically use a card winder of any size it can be helpful to form the cord into more than one bundle (coil), and wrap these together. This way tangles are less likely to form, and if one does it is confined to only a fraction of the total length of cord. Tangles that do not involve the ends are easier to release.
Figure 8 pattern is good but there is also another pattern which can be useful.
What you can do is roll the cord in medium sized circular loops. Keeping the size of each loop medium sized will have 2 advantages:
Also, in the final leg, loop the cord in helical way over the existing bundle so as to cover whole bundle. This will ensure tight loops and thus you can manage your cords more comfortably and without any hassles.
|show 1 more comment|