Am building a Frisian schouw, I have oakwood and build a frame on which the wood can rest. How would I know the wood has bend enough and how serious would it be if it is bend to far?
- Anybody can ask a question
- Anybody can answer
- The best answers are voted up and rise to the top
When I built my canoe, the front and back keel stems needed to be bent. I steamed the wood by putting it in some ABS pipe and putting that over a kettle. It's been over 25 years, but I think there was cloth stuffed at the top of the pipe to keep the steam in, or something like that. I left the wood steaming until it was warm and soft, and then clamped it in place on the form. If I couldn't get the wood to bend against the form, I put it back in the pipe to steam some more. Once I could clamp it right againt the form, I let it cool, and then carried on with the building process.
If you try to bend the wood when it's not soft enough it will break. Is that what you mean by "how serious would it be if it is bent too far?"