Tag Info

Hot answers tagged


You can buy specialist markers. They're designed to not impact the rope strength. Always use a sepecially designed rope marker as there is a comprehensive list of things to keep away from your rope and marker pen is one of them. The solvents can break down the nylon rope fibres making your rope potentially unsafe.


No matter what, try not to use the spray-paints at all. Considering that fact that most of the spraypaint and allied products contain solvents/chemicals like CCl4, Acetone, Methyl ethyl ketone, Ethylbenzene, Butoxyethanol and Xylene, etc. If I were you, I would not use it on my ropes for that matter. Dedicated Rope Markers : Spend some bucks and get a rope ...


I used fishermans thread, the sort used to bind the guide loops to the rod, as a whipping around the approriate point.


Your equipment should all come with a Kn rating. this is the force that that piece of gear will hold (often in what direction). So looking at a standard carabiner: This will hold 25Kn when loaded correctly (from the base to the top) 9Kn when loaded correctly but with the gate open and 7Kn when loaded incorrectly (though the screw gate) All pieces of ...


Firstly, the technique you describe is actually called "Moving together" at least by British climbers. The technique is used to move rapidly on relatively easy ground while also providing a degree of protection from falls. It is also used to rope up while crossing glaciers. This website has a good set of photos showing how to attach the rope to your harness ...


I use a figure-eight loop. Fairly easy to remove when you need to. Also gives the possibility to descend on one or two ends of the rope if the middle is brought to your anchor.

Only top voted, non community-wiki answers of a minimum length are eligible