New answers tagged

2

I wouldn't do this the way you propose. If I understand you correctly, you want to clip the top bolt, then have your belayer hold your weight while you set up a top anchor, and you want to know how to unclip your quickdraw after and load the top anchor. My first question would be, why aren't you using a personal anchor? My second question would be, why ...


1

This is not a complete answer to my own question, but I came across the following relevant material in the book by Long and Gaines on climbing anchors. For toprope setups, most professional guides use static rope when tying off huge boulders and blocks, since it is more abrasion resistant and less likely to jam in pinches than webbing. Static rope ...


5

In addition to the other answer I'd like to add that ropes are way safer than webbing in a scenarion where it actually comes in contact with rock. This is the case in top rope anchors when you have to tie the rope back over the edge of a cliff. Ropes are designed with a protective layer (mantle) and a load bearing inner part, also when moving, they only ...


4

You are clearly overthinking this. Even if your are hanging freely, you should be able to take away your weight from the rope by pulling on gear and unclip the quickdraw (there is nothing that can go wrong, you are on belay). Still there are different ways to do this in a controlled fashion, in practice I only use the following. If there is one solid piece ...



Top 50 recent answers are included