11

The other day, this question (Why did wetting down canvas sails increase the speed of a sailing ship?) was asked regarding the historical practice of wetting down sails. The current answer quotes several sources describing two factors. First, is to swell the fibers of the sail and to seal the spaces between threads so that the wind blows along the sail, not through it. This makes perfect sense to me. The second, per the quoted sources, is to "to flatten their canvas" or "likewise making the sails stand flatter." This lies almost in direct contrast to my intuition.

I've been taught (and I admit I am barely a novice sailor, and mostly a power-boater or paddle-boater) that a sail acts similar to an aircraft wing, so to make it create aerodynamic lift, it needs to have a wing-like shape to it, called a belly. This article describes the concept and why it is important. At first glance it would seem that flattening a sail would reduce the pressure differential between the windward and leeward sides, thus reducing the lift generated by the sail, taking speed away from the sailboat. Yet both quoted sources in the linked answer refer to either racing or pursuit, and the wettened flat sails aiding the vessel's speed.

In trying to justify this, I wondered whether it mattered if one was dealing with a square-rigged sail versus a fore-and-aft sail, and also if the vessel is on a beat, reach or run. For example, the sail on a square-rigger on either a broad reach or a run is essentially using the wind like a pushing hand, so maximizing area of resistance is more important than creating a lifting surface.

One of the sources tends to confirm this partially:

general practice ... to cut and sew the sails so they would form themselves into a bag to hold the wind, although the advantage of flatness of surface for plying to windward was well understood.

At the same time, it contradicts my thoughts above, as "plying to windward" is equivalent to beating, and the reference to yachting and the America suggests fore-and-aft rigs.

I just can't wrap my brain around wanting flatness in this situation. Please help me understand the interplay between the various forces acting on a sail and how the amount of belly helps and hurts in various points of sail.

9

I didn't intend to self-answer, but after hours of 'net searching I seem to have stumbled on the answer, provided by an Olympic Gold Medalist sailor from Australia, so I hope we can trust it. You can read the full article at Australia Sailing yourself, I will just summarize it.

When on a boat and the winds are gaining in intensity, this will have the effect of adding power to your sails, which adds speed. At the same time, the higher winds will increase the heel of your boat, which takes speed away and makes the helm unbalanced. When the heel exceeds a few degrees, the net effect is negative, and you need to de-power your sails.

You can do this by either pinching in, meaning to sail closer to the direction of the wind, or by flattening sails, reducing their horizontal curvature. There are a few ways to do this, including adding tension to the backstay, putting the traveler all the way out, increasing down-haul, and- as the linked question and answer describe- wetting the sails.

  • You should also add in that flattening also includes reducing wrinkles, as @Beanluc mentioned. This is still important on a reach, while you let the sails out a fair bit. – Rory Alsop Feb 26 '18 at 16:19
  • This is a great answer cobaltduck. SE encourages self-answering, so I'm glad you did. – Sue Saddest Farewell TGO GL Mar 13 '18 at 21:53
  • You deserve some force diagrams for this, but I haven't managed to make them up. Though the sail wetting has entirely the opposite effect on a historic square rigger, on modern sail materials it makes no difference at all. – Separatrix Nov 5 '18 at 9:47

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.