What is the proper way to make a spear with a fixed blade to prevent breaking as described by Vorac in his comment here?

  • I think "how to make it", "what to use it for and what not for" and "how to use it" are one atomic question.
    – Vorac
    Commented Sep 5, 2012 at 13:37
  • 1
    Please feel free to edit :) Commented Sep 5, 2012 at 13:41
  • Hi Russell! In the question you referred to I can't find a comment from Vorac. It must have been deleted. I also can't seem to find a user named Vorac, so perhaps he left the network and deleted his whole profile. However, I did find a comment there by @MiroslavVitkov, which is the same user who left a comment here, and it looks like that might be who you meant, but I don't want to assume anything. If you'd like, would you kindly check on it and edit the question? Thanks! Commented Dec 17, 2017 at 23:49

3 Answers 3


This is the best way that I know of, courtesy of Field and Stream. The spear they made can be seen in the picture below. The guide I've linked is step-by-step.

enter image description here

You could just tie the knife on, but there is a high chance of it slipping, especially if the stick you're using is smooth (like Bamboo) and the knife doesn't have a lanyard hole to secure the binding in place.

Assuming you're using a flint knife, you could attach it this way. After tying it together, you could glue the binding using pine pitch or a similar adhesive.

Personally, I'd go with making a spear because that allows the knife to be used as a backup weapon and prevents it from getting damagedd. This guide by Wikihow covers nearly all the different survival spear types that I know of. If you intend to fish with your spears, you might find this guide on the Hawaiian Fishing Spear helpful.

If you're in a survival situation and need to get fish fast, this other fishing spear may come in handy. All credit for the guide and picture go to Hedgehog Leatherworks.

enter image description here

If you really want to use your knife as a spear-point, you could get a knife designed for such a purpose, such as the Cold Steel Bushman (picture below taken from company page). It doesn't break or chip easily, as can be seen from this independent destruction test.

enter image description here


Personally I wouldn't! You run the risk of losing/breaking your blade.

Better to use the blade to sharpen a stick and fire harden the tip (till it goes brown, not black) it or attach something you don't mind loosing like a flint napped blade.

  • 1
    I concur. BTW it is strange how many videos and web pages are out there, detailing in length how you should sharpen a stick. lol
    – Vorac
    Commented Oct 2, 2012 at 7:32
  • 1
    I agree, if you're put in a position where you need to make a spear, it's probably a bad situation, and a good knife can be your best friend when you're alone in the woods. Commented Oct 4, 2012 at 15:29
  • Just as an aside - an Ars Technica article shows that fire hardening does harden the spear, but at the cost of durability (Makes it much more fragile).
    – JohnP
    Commented Dec 18, 2017 at 17:01

Survival Spears

Unless you plan to defend yourself from trees, I would focus more on the proper use of a spear fashioned from a knife.

The factors that must be considered are: (1) solidly attaching the knife and (2) how to use a spear without breaking the tip.

Attaching the Blade

One of the best fastening methods involves rawhide strips that have been soaked in water, wrapped tightly around the entire length of the handle and stick end, and left to dry. The characteristics of rawhide cause it to shrink as it dries, resulting in a wrap that is much tighter than could be done by hand.

Tie wire would also be an excellent choice, though not as readily available in the field. Tie wire is used to connect reinforcing bar (aka rebar) in concrete work. Use it like a twist tie, tightening it with a pliers as you go, and do as many pieces as will fit in a single layer. It can be found at hardware stores and lumber yards.

If rawhide or tie wire are not available, paracord would be another option but, due to the weave and characteristics of nylon, paracord stretches, making it difficult to maintain a tight connection. It is possible to shrink paracord slightly by keeping it wet, but using other materials would still be preferable.

Using the Spear

There is a direct trade off between blade sharpness and durability, so the sharper your spear, the more fragile it will be (assuming you're using a well honed edge). Blades are designed for slicing, spears for penetrating. The best thing to do, as mentioned previously, is not use a spear fashioned in this manner to fend off tree attacks. Get or make an archery target for practicing, and place something soft around the target.

If you would rather not be concerned about breaking the tip, fashion a spear head by hammering or grinding down a piece of rebar. The end result should look something like a large pencil (the yellow paint is optional).

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.