Prusik knots are useful in emergency situations as they can be used for both climbing up a rope (out of a canyon) or down a rope (rappelling) without someone else providing a fireman's belay.

How would I go about properly tying a Prusik knot?

  • Similar knots are the Autoblock aka French Prusik and the Klemheist Inevitably there is some debate about their relative merits but both are defintely a bit easier to tie than the prusik. They are also a handy way of providing adjustable tension for a tarp ridge-line etc Commented Feb 3, 2017 at 3:01

1 Answer 1


A Picture is worth a thousand words:

Illustration of a prussik knot

  • I've used the first two steps a number of times. Is there much benefit to the additional loops? Commented Jan 25, 2012 at 17:20
  • 2
    Friction I could see, but the weight is still being put entirely on the two ends coming away from the knot. Thanks! Commented Jan 25, 2012 at 17:30
  • @TimothyStrimple More wraps = more friction. You test it and see if it stops your descent with no hands. If it slips, you add more wraps.
    – endolith
    Commented May 28, 2018 at 23:25
  • @TimothyStrimple in my experience, it depends on what kind of activity you are doing. If it is merely a safety measure for self-belay, one or two wraps should be sufficient because a fall would cinch the prusik very quickly. However, when I am using a pair of prusiks to ascend a rope, I usually want at least 3 wraps because I need the prusik to bite into the rope immediately so I don't lose any effort through sliding.
    – BlackThorn
    Commented Jun 7, 2018 at 19:56
  • Rope thickness also matters. The bigger the difference between your ropes, the more likely you are to need a double or triple (the one in the picture) prusik knot.
    – Monster
    Commented Jun 11, 2018 at 8:35

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.