As long as the wood is dry and you have good kindling, does it matter how I start a fire?

  • 1
    I'm not sure on most effective but the basic idea is to get a balance of oxygen supply to availability of fuel (the wood) to retaining the heat in the coals. Think fire triangle you need a good balance of all three elements
    – user2766
    Commented May 20, 2015 at 8:02
  • I have always made a small tepee, and then built a Roofed Log Cabin around it. The tepee starts first and then lights the roof and surrounding cabin. Is this a good way, or what other ideas are there? Commented Feb 17, 2016 at 1:10
  • All of the above. I do all three in a single fire build.
    – ShemSeger
    Commented Feb 23, 2016 at 23:40
  • No, it does not matter. The fire doesn't care. ;-)
    – Drew
    Commented Jul 23, 2018 at 4:05

2 Answers 2


All are perfectly valid, which works best depends on the circumstances.

In my experience a log cabin stack is good when you have short square sticks, for example what you would get from splitting sawn logs and a teepee tends to be easier to build when you have more irregular branches and twigs.

The lean to is useful if there is a strong wind coming from one direction and you want to use a log, rock or earth bank as a windbreak.

Really this only matters when you are laying the fire ready to light as you are trying to protect your kindling from wind and rain and make sure that the updraft is carrying the heat into the rest of the fuel. This really comes from having a sense of how a fire in general and the specific fuel you are using works.

In practice, in anything less that ideal conditions you need to pay close attention to how the fire is developing and add or remove fuel and adjust the structure accordingly.

Once the fire is properly going it just becomes a case of laying on the fuel to get the sort of heat you want. In a wild camp you want to just use what you can find as it is rather than spending time and effort processing it to conform to some arbitrary design of what a fire should look like so it is often a case of fitting in the odd shapes and sizes of fuel that you have to hand.

  • +1, all true. I do find myself using the lean-to configuration 80% of the time, though. Can build a fire in the middle of a snowstorm with that, and it works just fine when conditions are ideal as well.
    – DCShannon
    Commented Aug 23, 2016 at 20:22

It honestly depends on conditions and what you are trying to accomplish.

If you have nice whittled shavings to start with, the make a log cabin of those, and slowly increase the size of kindling and finally logs added to the fire.

If you have branches that are roughly 1 inch, then a teepee is better.

Don't forget the star configuration. That 5 logs laid out radially, with a fire started in the center. As they burn you push the logs in closer to each other. It's perfect for cooking because you can control the heat, and it can maximize the lifetime of your fuel.

There are lots of configurations depending on conditions like the dryness of your firewood, how big it is, is it split or solid, what are you going to use the fire for. Do you want smoke or smokeless, do you want lots of heat or do you just want light to keep animals away, etc etc etc.

It's really too broad a question without knowing what you want to accomplish and under what conditions.

  • 2
    Just to add to the list there's also a fire log, One big log split into 5 and tied back together with something to keep the sections apart. This burns for a very long time and is great for cooking on.
    – user2766
    Commented May 21, 2015 at 9:04
  • 2
    The star configuration is more about keeping a fire going than starting one. Starting a fire and maintaining one are related, but not the same problem. Commented Feb 17, 2016 at 20:31

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.